Autonomous drone
A fully autonomous drone built for the Raytheon sponsored UAS Showcase. I led the hardware design and we placed 2nd overall.
We designed, built and tested an autonomous drone to compete at the annual UAS Showcase sponsored by Raytheon Intelligence and Space. The drone had to complete three challenges on its own:
- Lift off from the zero yard line of a football field, detect the 30 yard line and land as close as possible to it
- Lift off from the 30 yard line, find a unique logo anywhere on the field, navigate to it and land directly on it
- Navigate through an obstacle course in as little time as possible
What I did
I was the hardware design lead for a team of about 14 people.
- Designed the overall powertrain of the drone
- Developed the fully parametric CAD model of the 3D printed frame, and ran FEA on the mechanical loading during landing
- Programmed and tuned the flight controller for stability and maneuverability
- Selected the image recognition hardware, and selected, set up and tested the GPS/RTK hardware
- Became FAA Part 107 certified
- Managed the other engineers and made sure deadlines were met
Challenges
The frame had to be structurally optimized to survive testing, and the drone had to stay stable in high wind. Converting the vision data into a form that allowed precision landing was difficult, as were the RTK GPS setup and long range communication. The camera also needed a tilt mechanism to move from downward facing to forward facing.
Results
- The design won 2nd place overall at the UAS Showcase
- The drone completed all three challenges without any human intervention





